Browse Category: DIY

What can you use if you do not have a Hammer

There are times in life where you will suddenly need a hammer and not having one can position you in a bit of a pickle. You might require one to hang an image, repair a wonky table leg, or do anything else that requires being smashed with a heavy object repeatedly.

So, what do you do if you do not have a hammer and can’t borrow one? The answer may, or might not, surprise you.

What can you use if you do not have a hammer


The best thing to use when you are hammerless is a flat-ish rock. Such rocks are easy to hold onto and strong sufficient to repeatedly strike things.

Invest a couple of minutes to discover the most suitable one and make certain that you can hold it comfortably and that it has at least one flat or a little rounded side.

How to use a rock safely
Using a rock as a hammer is not as simple as it appears. If you do not understand what you are doing, it is really simple to harm yourself.

Various rocks for different jobs


Flat rock – Rocks with a completely flat edge are more fit to hammering nails into wood, putting furniture together, and driving a chisel.
Long flat rock – This kind of rock is best if you can’t rather reach the important things you need to hammer. A good example of this would be hanging a large photo or hammering adds into the wall to hold fairy lights.
Rounded rock – The rounded rock is perfect for hanging images; the rounded edges ensure that your gripping hand will never get caught in between the wall and the rock.

Post Sponsored by http://enfieldglass247.co.uk/.

What Can You Use if You Don’t Have a Drill

Tools are necessary to every professional and amateur handyman. Tools break and get lost, and often you’re in immediate need of a tool that you do not have at hand for one reason or another.

What Can You Use if You Don’t Have a Drill

The primary function of a drill is to make holes for bolts in hard surface areas. The other function is to relieve the stress of screwing bolts instead of using a manual screwdriver. It does can be found in useful when you need to screw a wide variety of bolts.

Method # 1: For drilling holes into plastic

  • Heat a sharp piece of copper;
  • Location over the plastic surface, where you want to drill a hole;
  • Let it melt the plastic into the shape of a hole.

The technique is to have the perfect size copper piece, however you can quickly discover it in your regional hardware shop.

Method # 2: Make your own bow drill

  • Use 2 wood sticks– connect a strong piece of string on both ends of one to serve as a bow, and the other must have a sharp end on one side and a deal with on the other.
  • Scrape out a little hole in the wood, where you wish to drill your hole.
  • Location the pointy end of your second stick there and use pressure.
  • Wrap the string (bow) around the drill bit.
  • Drill into the wood by pushing on the handhold and moving the bow.

Post Sponsored by Pressure Washing Services.

What to use if you do not have a Spanner

We have all skilled moments where a table or chair leg is loose and shaky, there is a dripping pipe or furniture has to be taken apart in preparation for a house relocation.

We attempt to use our fingers but only wind up with aching fingers, as the old adage goes: you should use the right tool for the job. In these cases the ideal tool is a spanner, but what do you do when you don’t have a spanner?

Don’t stress, we have collected a list of common household objects you can use instead of a spanner.

What is a Spanner Used for?
Spanners are available in numerous types and sizes for a variety of various tasks and are a vital part of any tool kit. Used to loosen or tighten up nuts, bolts, pipes and pipes fittings they show their effectiveness sometimes over.

What to Use if You Don’t Have a Spanner

Duct tape works in nearly any scenario but you might be surprised to find out that you can use it to loosen up bolts. First tear off a section approximately 12 inches in length, after this tear it down the middle so you are left with two 12 inch strips.

Make a strong tape strip by sticking one strip to the back (the non-sticky side), next wrap part of the strip around the nut leaving a ‘tail’ 6-8 inches long and press securely to guarantee it has abided by the metal nut. Pull the duct tape tail in the instructions required to loosen up the nut to easily remove it.

2 coins
Who would think that cash can be used as a makeshift tool? Take two big coins (2 cent coins work perfectly for this) and place them on either side of the nut. Grip the coins in between the knuckles of your index and middle fingers for additional grip and twist in the direction required to loosen up the nut.

Zip-tie
These fantastic little tool kit devices aren’t simply utilised to clean cables and attach hubcaps, they can likewise be utilised in place of a spanner.

Place the zip-tie around the nut as securely as possible and utilising the tail of the zip-tie pull in the instructions needed to loosen or tighten the nut.

Another nut and bolt
If you don’t have any of the formerly mentioned objects but have lots of nuts and bolts lying around, you can still create a makeshift spanner with 2 nuts and 2 bolts.

First, attach one of the nuts to among the bolts and place it on top of the nut you want to loosen up or tighten (so that the thread of the bolt is on top of the nut). Adjust up until the nut is grasped tightly between the head of the bolt and the nut.

Now take the 2nd nut and connect it so that you can connect the two bolts, make certain that whatever is connected tightly and turn your production in the instructions needed.

There we have it, four options you can utilize to loosen up or tighten up nuts without a spanner. With this guide, there are no more reasons for why you have not done any of the jobs you stated couldn’t be done yet due to the fact that you do not have the tools!

Naturally, it is constantly much better to have a tool kit with the basic tools required for basic DIY however with these quick fixes, you won’t be caught in a pinch again.

Post Sponsored by ‘Emergency Glazier Stoke‘.