Browse Month: November 2019

What to use if you do not have a Spanner

We have all skilled moments where a table or chair leg is loose and shaky, there is a dripping pipe or furniture has to be taken apart in preparation for a house relocation.

We attempt to use our fingers but only wind up with aching fingers, as the old adage goes: you should use the right tool for the job. In these cases the ideal tool is a spanner, but what do you do when you don’t have a spanner?

Don’t stress, we have collected a list of common household objects you can use instead of a spanner.

What is a Spanner Used for?
Spanners are available in numerous types and sizes for a variety of various tasks and are a vital part of any tool kit. Used to loosen or tighten up nuts, bolts, pipes and pipes fittings they show their effectiveness sometimes over.

What to Use if You Don’t Have a Spanner

Duct tape works in nearly any scenario but you might be surprised to find out that you can use it to loosen up bolts. First tear off a section approximately 12 inches in length, after this tear it down the middle so you are left with two 12 inch strips.

Make a strong tape strip by sticking one strip to the back (the non-sticky side), next wrap part of the strip around the nut leaving a ‘tail’ 6-8 inches long and press securely to guarantee it has abided by the metal nut. Pull the duct tape tail in the instructions required to loosen up the nut to easily remove it.

2 coins
Who would think that cash can be used as a makeshift tool? Take two big coins (2 cent coins work perfectly for this) and place them on either side of the nut. Grip the coins in between the knuckles of your index and middle fingers for additional grip and twist in the direction required to loosen up the nut.

Zip-tie
These fantastic little tool kit devices aren’t simply utilised to clean cables and attach hubcaps, they can likewise be utilised in place of a spanner.

Place the zip-tie around the nut as securely as possible and utilising the tail of the zip-tie pull in the instructions needed to loosen or tighten the nut.

Another nut and bolt
If you don’t have any of the formerly mentioned objects but have lots of nuts and bolts lying around, you can still create a makeshift spanner with 2 nuts and 2 bolts.

First, attach one of the nuts to among the bolts and place it on top of the nut you want to loosen up or tighten (so that the thread of the bolt is on top of the nut). Adjust up until the nut is grasped tightly between the head of the bolt and the nut.

Now take the 2nd nut and connect it so that you can connect the two bolts, make certain that whatever is connected tightly and turn your production in the instructions needed.

There we have it, four options you can utilize to loosen up or tighten up nuts without a spanner. With this guide, there are no more reasons for why you have not done any of the jobs you stated couldn’t be done yet due to the fact that you do not have the tools!

Naturally, it is constantly much better to have a tool kit with the basic tools required for basic DIY however with these quick fixes, you won’t be caught in a pinch again.

Post Sponsored by ‘Emergency Glazier Stoke‘.